ATLAS | BATTERY CHARGER

Proper Location and Mounting of Charger 

It is recommended that the charger be mounted in a secure, cool dry place and plugged into a dedicated circuit.  Before using any outlet, be sure to double check the connections inside the outlet.

 

 

The charger provides a display of the charging voltage, charging amps and the percentage of what the charger is charging at. For example, when the charger is showing 100%, the charger is working at its full capacity. When the charger shows 0%, it has fully charged and is ready to operate.

If the ProNautic charger does not recognize a connection to the battery or the lane machine, the display on the charger will read BC.  Once the charger is plugged into the lane machine and a connection is made, it will operate as normal.

WARNING: This product contains DEHP, and other chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.  For more information go to www.P65Warnings.ca.gov

 

ProNautic® charger (Programmed for Lithium batteries)

Your ProNautic charger is programmed specifically for the batteries in your ATLAS.  The settings will display calcium custom for this reason.  When charging, the aolts displayed will be constant at 28.8 during the entire length of the charging process.  The only thing that will drop is the charging Amps along with the charging percentage.

Was this article helpful?

Can’t find what you’re looking for?

Our award-winning customer support team is here for you.


24/7 TECH SUPPORT
Free award-winning tech support:
US Toll-Free: (800) 280 2695
International: +1 863 734 0200