REASON
-
The machine is applying cleaner and the LDS distance is greater than 1 foot and the squeegee up switch signal is activated.
THE SQUEEGEE MOTOR RUNS BUT THE DOWN SWITCH FAILED TO SEND A SIGNAL
- Check and inspect the switch
- Loose connection at the yellow 24Vdc wire
- Loose set screw on motor cam
- Broken black wire or loose connection to input 30
- The squeegee up switch is engaged
THE SQUEEGEE MOTOR DOES NOT RUN
- Fuse is blown (3.25A)
- Bad fuse holder
- Squeegee linkage is in a bind
- Relay CR-2 has failed
- Broken Blue/White wire
- Motor has failed