ATLAS WALKER | DAILY MAINTENANCE

The felt inside of the oil compartment must be wiped down and the drip pads on each side of the transfer and buffer brush assembly must be wiped free of oil.

Wipe around the moving head and check each end of the head bar.

All surfaces around the oil compartment should be thoroughly cleaned.

To ensure the moving head bar does not get dry in either the oil or cleaning compartments, simply apply a light film of lane oil on each bar.

Remove dirt and debris from transfer brush. 

Wipe down the buffer brush with a clean, dry towel.

Stand the machine in the transport position and wipe off the squeegee assembly.

Clean off the guide wheels.

Was this article helpful?

Can’t find what you’re looking for?

Our award-winning customer support team is here for you.


24/7 TECH SUPPORT
Free award-winning tech support:
US Toll-Free: (800) 280 2695
International: +1 863 734 0200