REASON

• The machine is resetting the squeegee to the up position and the squeegee up switch signal has not been activated within 2 seconds.      

THE SQUEEGEE MOTOR RUNS BUT THE SQUEEGEE UP SWITCH FAILED TO SEND A SIGNAL

• Check and inspect the switch
• Loose connection at the yellow 24Vdc wire
• Loose set screw on motor cam
• Possible broken Yellow/Green wire
• Loose connection to input 20
• The squeegee down switch is engaged
• Input 20 on input board has failed

THE SQUEEGEE MOTOR DOES NOT RUN

• Fuse is blown (3.25A)
• Bad fuse holder
• Squeegee linkage is in a bind
• Relay CR-2 has failed
• Bad connection to the motor
• Defective motor